The Fredericks Company is an industry leader in electrolytic tilt sensors for an innovative and proven method of measuring anywhere from ±60° down to ±0.5° with high accuracy ranging from ±0.1° (±360 arcseconds) to ±0.0003° (or ±1 arcsecond). Generally, as the range of a tilt sensor decreases, the accuracy increases, which can be seen by looking at our tilt measurement options below. Note that our highest accuracy and glass sensor solutions are typically higher cost, and we’re here to help with a cost-benefit analysis of specific solutions. Our tilt sensors are used in a wide variety of applications ranging from RV leveling and construction vehicle leveling to extremely high accuracy markets like geotechnical and structural health monitoring, and everything in between.
In addition to the tilt sensor component for board-level designs, we also offer complete electrolytic tilt sensor circuits, and electrolytic inclinometers that are environmentally sealed and designed for industrial and outdoor use. We have an engineering department with electrical, PCB layout, software/firmware, and mechanical design expertise, so we’ll work with you to build the ideal solution specific to your needs. A complete list of all of our tilt measurement solutions is below.
電解式チルトセンシングの原理と、チルトセンサをアプリケーションに組み込む方法の詳細については、技術情報のページを参照してください。
ワイドレンジチルトセンサー
この電解式傾斜センサは、1軸または2軸で± 0.1 °~±0.05°の高精度で±60°までの広い範囲の測定ができるように設計されています。また、当社が提供するセンサーの中で最も低価格な製品です。
すべての電解式センサは、傾斜角出力を得るために電解式傾斜センサ回路(一般にシグナルコンディショニングまたはシグナルコンディショナとも呼ばれる)を必要とします。これはお客様のシステムに内蔵することもできますし、弊社が設計した回路を購入することもできます。当社の回路は、当社のセンサーが最高の性能を発揮できるように最適化されています。
電解式チルトセンサの原理や、お客様のアプリケーションに当社のセンサを組み込む方法については、技術情報のページをご覧ください。
ミッドレンジチルトセンサー
これらの電解式チルトセンサーは、±25°までの中距離測定が可能で、1軸で ±0.005°以上の非常に高い精度を持つように設計されています。これは、2軸の測定には2つのセンサーが必要であることを意味します。これらのセンサーは、当社のどのガラスソリューションよりもはるかに安価ですが、当社のワイドレンジセンサーよりも若干高価です。
すべての電解式センサーは、角度出力を得るために電解式傾斜センサー回路(一般にシグナルコンディショニングまたはシグナルコンディショナーと呼ばれる)を必要とします。この回路は、お客様のシステムに内蔵することもできますし、弊社が設計した回路を購入することもできます。当社の回路は、当社のセンサーが最高の性能を発揮できるように最適化されています。
電解式傾斜センサーの原理と、お客様のアプリケーションに当社のセンサーを組み込む方法の詳細については、技術情報のページをご覧ください。
ナローレンジチルトセンサー
この電解式傾斜センサは、1軸で± 0.001°以上の非常に高い精度で±3°までの狭い範囲の測定ができるように設計されています。このため、2軸の測定には2つのセンサーが必要になります。これらのセンサーは、当社のワイドレンジセンサーより若干高価ですが、ミッドレンジセンサーと同等のコストです。また、ガラス製センサよりもはるかに安価です。
すべての電解式センサーは、傾斜出力を得るために電解式傾斜センサー回路(一般にシグナルコンディショニングまたはシグナルコンディショナーと呼ばれる)を必要とします。この回路は、お客様のシステムに内蔵することもできますし、当社が設計した回路を購入することもできます。当社の回路は、当社のセンサーから最高の性能を引き出すために最適化されています。
電解チルトセンサの原理と、お客様のアプリケーションに当社のセンサを組み込む方法の詳細については、技術情報のページをご覧ください。
ガラスミッドレンジ
この電解式傾斜センサは、±10°の中距離測定で、1軸で ±0.0005°以上という極めて高い精度を実現しています。つまり、2軸で測定するためには2つのセンサーが必要になります。これらのセンサーは、より高い精度とガラス設計のため、当社の金属ソリューションのどれよりも高価です。
すべての電解式センサーは、角度出力を得るために電解式傾斜センサー回路(一般にシグナルコンディショニングまたはシグナルコンディショナーと呼ばれる)を必要とします。この回路はお客様のシステムに内蔵することもできますし、当社のセンサーが最高の性能を発揮できるように最適化した回路を購入することもできます。
電解式傾斜センサーの原理や、傾斜センサーをお客様のアプリケーションに組み込む方法については、技術情報のページをご覧ください。
ガラス狭域
この電解式傾斜センサは、1軸で±3 °~±0.5°の狭範囲測定、±0.0008 °~±0.0001°の極めて高い精度を有しています。つまり、2軸で測定するためには2つのセンサーが必要になります。これらのセンサーは、より高い精度とガラス設計のため、当社のフレデリックス・メタル・ソリューションのどれよりも高価です。
すべての電解式センサーは、角度出力を提供するために電解式傾斜センサー回路(一般にシグナルコンディショニングまたはシグナルコンディショナーと呼ばれる)を必要とします。この回路はお客様のシステムに内蔵することもできますし、当社のセンサーが最高の性能を発揮できるように最適化した回路を購入することもできます。
電解式傾斜センサーの原理や、傾斜センサーをお客様のアプリケーションに組み込む方法については、技術情報のページをご覧ください。
シグナルコンディショナ - 電解傾斜センサ回路
電解式チルトセンサーは、チルト角の出力を出すために基本的な電解式チルトセンサー回路が必要です。これらは、しばしばシグナルコンディショナー、シグナルコンディショニングボード、または電子チルトセンサーと呼ばれます。ほとんどの場合、当社のセンサーはPCBに直接実装することができます。これらの電解チルトセンサ回路は、アナログ0~5V DC、RS-232/RS-485、PWM、SPI通信など多くのオプション出力があります。
当社の電子式傾斜センサは、便利な取り付け穴とコネクタを備えているため、お客様の設計に当社の回路を組み込むだけで、簡単に使用することができます。もし、お客様が電解質チルトセンサー回路をボードレベルの設計に組み込むことを希望されるなら、弊社にはエンジニアリング部門があります。電気設計、PCBレイアウト、ソフトウェア/ファームウェア、機械設計の専門知識がありますので、お客様のニーズに合った電子式チルトセンサを一緒に作り上げましょう。
電解式傾斜計センサ
The electrolytic versions of our analog and digital inclinometer sensors utilize our Fredericks electrolytic tilt sensors and electrolytic tilt sensor circuits are the lowest cost environmentally sealed (up to IP66) inclinometer sensors we offer with a measurement range up to ±60° and repeatability from ±0.1° to ±0.05° in one or two axes. These inclinometer sensors have plastic housings and have a cable with flying leads that can be customized with a connector you specify. Optional outputs for our inclinometer sensors include analog 0 to 5 V DC, RS-232, RS-485, and UART/TTL digital communications.
チルトスイッチ
Our tilt switches (also referred to as a safety switch or tilt switch sensor module) are very similar to our inclinometers, but instead of a continuous output, tilt switches have a discrete on/off output from either a relay or an open collector. The angle where the tilt switch output changes can be set to specific ranges in one or two axes, up to ±45° tilt. These tilt switches come in plastic or metal housings, environmentally sealed up to IP66, with a cable and flying leads that can be customized with almost any connector you specify. The trip angle can be set by us at the factory or set and reset by you in the field.
The nature of the relay and open collector outputs make these units ideal for various tilt switch applications like construction vehicles and agricultural vehicles. More specific tilt switch applications include boom lifts, scissor lifts, and agricultural sprayers.
To learn more about the principles of tilt sensing and how to integrate tilt switch sensor modules into your application, see our Technical Information page.