Televac® MXアクティブゲージEthernetIPゲートウェイ

Part Number: 2-8900-100

Compatible With: MX2A, MX4A, MX7B, MX7M


  • Vacuum controller for up to (4) Televac® MX active vacuum gauges and (1) CDG
  • EthernetIP connections to the Televac® MX2A, MX4A, MX7B, and MX7M Active Vacuum Gauges
  • 真空ゲージ接続用の低コスト、標準的なCat5e ケーブル
  • アナログ信号からのレイテンシを大幅に低減(HMI/真空計の表示ミスマッチ
  • お使いのHMIから真空計をデジタルで校正
  • Configure all settings for Televac® MX series active vacuum gauges
  • パワーゲートウェイと接続された真空計へのDC24V電源供給
  • CDG用の±15 V DC電源接続(オプション
  • ラックやパネルに取り付け可能
  • 真空圧コントローラをPC、PLC、およびその他の機器に簡単に接続するためのEthernetIP
  • クラス 1 (サイクリック) およびクラス 3 (アサイクリック) 接続をサポートしています。
  • プログラム可能なIPアドレスとDHCPの有効化/無効化
  • 10/100メガビット、半二重または全二重ポート動作
  • USB経由でファームウェアのアップグレードが可能
  • ネットワーク/モジュールステータス/ポートデータアクティビティのステータスLED
  • ウェブブラウザを介してネットワークやゲートウェイのデータや設定に安全なウェブアクセスが可能
  • 優れたカスタマーサポート

The MX Active Gauge EthernetIP Gateway (sometimes also called an EthernetIP vacuum controller, EthernetIP vacuum control unit, or EthernetIP vacuum pressure controller) is the first and only solution designed to provide an EthernetIP connection between Televac® active vacuum gauges and Rockwell Automation® Allen-Bradley® PLCs. An increasingly popular industrial network communication standard, EthernetIP communication offers users faster and more reliable vacuum measurements and eliminates the need for additional analog-to-digital converters or other vacuum controllers and vacuum pressure controllers.


This EthernetIP vacuum control unit supports an easily configurable network of up to (4) Televac® active vacuum gauges and (1) capacitance diaphragm vacuum gauge (CDG) through EthernetIP communications. Multiple gateways can also be daisy-chained together for additional vacuum gauge connections (made possible by dual EthernetIP ports on the back of the unit). The gateway allows users to interface directly with supported PLCs and PCs, including the ability to read vacuum measurements and change vacuum gauge settings from a convenient, remote location without complicated conversion tools. In addition to Televac vacuum gauges, the gateway supports CDGs from MKS, Inficon, Leybold, Brooks, and Setra. 24 V DC and ±15 V DC with D-sub 15 (DB15) and D-sub 9 (DB9) connectors are supported.


MX Active Gauge EthernetIP Gateway
PN: 2-8900-100


MX DB15-RJ45変換アダプタ
MX DB15 to RJ45 Adapter
PN: 1-2403-001
CDG 24V DB15-RJ45変換アダプタ
CDG 24V DB15 to RJ45 Adapter
PN: 1-2403-002
CDG 15V DB15-RJ45変換アダプタ
CDG 15V DB15 to RJ45 Adapter
PN: 1-2403-003
CDG 24V DB9-RJ45変換アダプタ
CDG 24V DB9 to RJ45 Adapter
PN: 1-2403-004
CDG 15V DB9 - RJ45 アダプタ
CDG 15V DB9 to RJ45 Adapter
PN: 1-2403-005

Cat5e Ethernet Cables

10' 非シールド Cat5e イーサネットケーブル
PN: 1-2401-010
50' 非シールド Cat5e イーサネットケーブル
PN: 1-2401-050
100' 非シールド Cat5e イーサネットケーブル
PN: 1-2401-100
10' シールドCat5eイーサネットケーブル
10' シールドCat5eイーサネットケーブル
PN: 1-2402-010
50' シールドCat5eイーサネットケーブル
50' シールドCat5eイーサネットケーブル
PN: 1-2402-050
100' シールドCat5eイーサネットケーブル
100' シールドCat5eイーサネットケーブル
PN: 1-2402-100
動作範囲 5*10-11 Torr to 1*104 Torr
Communications (External) イーサネットアイピー
Communications (Active Gauges) RS-485
アクティブゲージRS-485アドレス 1 to 4
アクティブゲージRS-485ボード 38400
電源電圧 22 V DC to 26 V DC
最大出力 30 W以下
動作温度 0 °C~50 °C
保存温度 -20 °C ~ 70 °C
Maximum Active Gauges Controlled 4
最大CDG数の管理 1
応答時間 ≦100ミリ秒
P1 EthernetIP RJ45 port 1 to PLC/PC
P2 EthernetIP RJ45 port 2 to PLC/PC
NS Network status LED
MS Module status LED
1 Active gauge 1 connection
2 Active gauge 2 connection
3 Active gauge 3 connection
4 Active gauge 4 connection
CDG CDG connection
24 +24 V DC supply
GND Ground Supply
+15 +15 V DC supply for CDG (optional)
-15 -15 V DC supply for CDG (optional)
BTLD Bookload button
USB USB communication for bootloading
Connectors (2) RJ45
Ports 10/100 Mbit, half or full duplex
DHCP Enable or disable
Class 1 Connections  
Connection Type Point-to-point, multicast
Target to Originator Instance ID 100
Data Size 20
Originator to Target Instance ID 150
Data Size 4
Configuration Instance 3
Supported Connections 4
Requested Packet Interval 1 ms to 3200 ms
Trigger Types Cyclic, change of state
Priorities Low, high, schedule, urgent
Class 3 Connections  
Service 0xE (get), 0X10 (set)
Class 0xA2
Instance See ADI table
Data Value Attribute 5
Supported Connections 6
Requested Packet Interval 100 ms to 10000 ms
Connection Type Point-to-point
Trigger Type アプリケーション

Please refer to the instruction manual for a complete list of Class 1 and Class 3 connection details, a complete list of ADIs, and information about the Electronic Data Sheet (EDS) file.

The RJ45 connectors labeled P1 and P2 are the EthernetIP connections that will run to the PLC or PC. The RJ45 connectors labeled 1 through 4 are the active gauge inputs. These will run through Cat5e Ethernet cables and through an adapter to attach to the active gauges in the network. All active gauges must be set to separate RS-485 addresses 1 through 4 and baud rate 38400 to communicate with the gateway. The RJ45 connector labeled CDG will connect to the CDG in the network if one is available. The CDG must be turned on through the appropriate parameter in the ADI table.

The power input connector accepts a +24 V DC and GND connection, as well as an optional ±15 V DC input to run to the attached CDG if required. Regardless of the alternate supply, the gateway and attached active gauges require the +24 V DC input to be connected in order to operate. The pushbutton labeled BTLD is to be pressed while powering the gateway to send the unit into bootload mode for the ability to easily update the firmware, and the update occurs over the USB connection.

エンクロージャ アルミニウム
電気的接続 4ピンコネクタ
重量 0.65 kg (1.4 ポンド)

Dimensional drawing of the Televac® MX Active Gauge EthernetIP Gateway. Vacuum Controller for all Televac® MX Series Active Vacuum Gauges.

Certified to UL 61010-1
Certified to CAN/CSA C22.2 No. 61010-1-12
CE certified to EN 61010-1, EN 61236-1, EN 55011
RoHS compliant
EAC certified
数量 Discount
1 List
5 2%
10 5%
15 7%
20 10%
25 13%
30+ 15%

Cat5e Ethernet Cable Quantity

数量 Discount
1 List
50 5%
75 10%
100+ 15%

Using the Gateway for Heat Treat and Vacuum Furnace Applications

This vacuum controller gateway is particularly useful for heat treat and vacuum furnace applications where a single gateway can eliminate the need for up to (5) analog-to-digital converter (ADC) input channels while simultaneously reducing any latency from analog-to-digital conversions (causing a mismatch between the vacuum gauge display and the furnace human-machine-interface or HMI). The EthernetIP vacuum controller gateway also gives the end user the ability to calibrate their vacuum gauges from their HMI by interfacing digitally with the vacuum controller gateway. This means no more climbing on top of your furnace to do vacuum measurement comparisons! The ability to change settings and calibrate digitally is due to the unique design of the vacuum controller gateway, where all communication with Televac® vacuum gauges is done digitally (via RS-485).


基本的には、EthernetIP真空圧コントローラゲートウェイをEthernetIPコンバータへの空想のRS-485として考えることができます。これの例外はCDG入力で、CDGの0~10V DCアナログ出力をデジタル値に変換します(アナログ-デジタル変換器を使用)。EthernetIP真空コントローラ/真空制御ユニットソリューション(アクティブ真空計やゲートウェイの代わりに)をお探しでしたら、MX200 EthernetIPをチェックしてください。