Part Numbers: 2-7980-031, 2-7980-032, 2-7980-052
Features and Benefits:
- Very compact wide range vacuum pressure gauge
- Easy-to-read LED digital vacuum gauge display
- Excellent resolution and repeatability vacuum gauge
- Superior unit-to-unit performance between vacuum gauges
- ISO 17025 accredited and NIST traceable calibrations optional
- Excellent customer support for vacuum gauges
The Televac® CC-10 Wide Range Active Vacuum Gauge (also called an analog vacuum gauge, digital vacuum gauge, or vacuum pressure gauge) utilizes two internal sensors to measure full range vacuum from UHV (10-9 Torr) to above atmosphere (103 or 1000 Torr). This vacuum gauge has a variety of features including RS-485 communications, three programmable set points, and a selectable analog vacuum pressure gauge output.
The bright LED digital vacuum gauge display makes it easy to read from a distance. Options on this wide range vacuum pressure gauge can be set from four touch controls on the front of the unit or through RS-485 communications. This vacuum gauge offers an extensive selection of fittings, simple use, and easy sensor replacement making it an excellent choice for a variety of vacuum applications.
CC-10 Wide Range Active Vacuum Gauge
D-Sub 15, 15 Conductor Cable (Flying Leads)
Wall Power Supply
Replacement Parts
| Operating Range | 1*10-9 Torr to 1000 Torr |
| Communications | RS-485 |
| Analog Output | 0 V to 10 V linear/logarithmic |
| Programmable Set Points | 3 relays |
| Supply Voltage | 22 V DC to 26 V DC |
| Maximum Power | 8 W |
| Calibration Medium | Dry air or nitrogen |
| Overpressure | 150 PSI |
| Digital Output Resolution | 2 significant digits with exponent |
| Analog Output Resolution | 16 bits |
| Operating Temperature | 0 °C to 50 °C |
| Storage Temperature | -40 °C to 85 °C |
| Bakeout Temperature | 110 °C (electronics removed) |
| Response Time | ≤500 ms |
| Display Readable Display | 4 m (13 ft) |
| Accuracy | |
| 10-9 Torr to 10-1 Torr | ±0.2 of decade |
| 10-1 Torr to 200 Torr | ±15% of reading |
| 200 Torr to 1000 Torr | ±5% of reading |
| Analog Output | ±10 mV |
| Pin | Description |
| 1 | Analog Out (Ground) |
| 2 | RS-485 A (-) |
| 3 | SP3 Out |
| 4 | SP2 Out |
| 5 | SP1 Out |
| 6 | Zero adjust input (signal in) |
| 7 | EXT Vcc (signal in) |
| 8 | Supply Voltage (+) |
| 9 | Analog Out (0 to 10) V |
| 10 | RS-485 B (+) |
| 11 | SP2, SP3 COM |
| 12 | SP1 COM |
| 13 | HV inhibit signal (signal in) |
| 14 | Atm adjust input (signal in) |
| 15 | Supply Voltage (-) |
| <STX>0R1<CR> | Read units |
| <STX>0R2<CR> | Read SP1L and SP1H |
| <STX>0R5<CR> | Read analog output set parameter |
| <STX>0W1XXXX<CR> | Set pressure unit |
| <STX>0W2XXXXXXXX<CR> | Set SP1L and SP1H |
| <STX>0C1<CR> | Crystal gauge atm adjustment |
| <STX>0S1<CR> | Read pressure data |
| <STX>0S2<CR> | Read error status |
Assume address 0
Full list of commands is available in the instruction manual.
The CC-10 has three set points. All three are optically coupled solid state relays that are rated for 0.12 A at 50 V DC. Each set point has hysteresis characteristics and consists of two set values: upper threshold and lower threshold. LEDs on the front panel display the status of each set point. The high and low threshold values of each of the three set points can be set independently.
| Molybdenum |
| Glass |
| Copper |
| Stainless Steel |
| Chromium |
| Solder |
| Fluorocarbon Elastomer |
| Quartz |
| Enclosure Material | Metallized plastic |
| Electrical Connections | D-Sub 15-pin male |
| Weight with Sensor | 698 g (1.54 lbs) (NW25 Flange) |
| Weight without Sensor | 355 g (0.78 lbs) |
| CE certified to EN 61010-1, EN 61236-1 |
| RoHS compliant |
| IP40 |
| ISO 17025 accredited calibration optional |
| NIST traceable calibration optional |
Product Documentation
| CC-10 Wide Range Datasheet |
| CC-10 Wide Range Instruction Manual |
| Televac® Vacuum Calibration Tolerances |
3D Models (STEP Files)
| 2-7980-031 – CC-10 NW25/KF25 Stainless Steel |
| 2-7980-032 – CC-10 NW40/KF40 Stainless Steel |
| 2-7980-052 – CC-10 CF40/2.75″ CF-F Stainless Steel |
Application Notes
| Televac® Application Note 3015: Recommended Practices for Vacuum Calibration |
Tools
| Televac® Vacuum Measurement Converter |
| Web Serial Terminal |
Articles
| Vacuum Measurement Using Modern Cold Cathode Technology |
Brochures
| Televac® Vacuum Measurement Product Catalog |
CC-10 Wide Range Active Vacuum
Gauge Quantity Discounts
| Quantity | Discount |
| 1 | List |
| 5 | 2% |
| 10 | 5% |
| 15 | 7% |
| 20 | 10% |
| 25 | 13% |
| 30+ | 15% |
D-Sub 15 Cable Quantity Discounts
| Quantity | Discount |
| 1 | List |
| 50 | 5% |
| 75 | 10% |
| 100+ | 15% |